DiscoWorld | Dj udstyr, alt fra Dj Mixer, Røgmaskine, Højtalere mm. Kæmpe udvalg og lave priser.DiscoWorld | Dj udstyr, alt fra Dj Mixer, Røgmaskine, Højtalere mm. Kæmpe udvalg og lave priser.E-mærket, godkendt af e-handelsfonden
Dankort Visa Eurocard Visa Electron JCB
  Højttalere » Subwoofere Kunde-login | Indkøbskurv | til Kassen  
Nyheder mere
Studiologic Numa Stage - DEMO
Studiologic Numa Stage - DEMO

 » Kontakt og kundeservice

 » Handelsbetingelser

 » Kontakt os

Dynacord FX20-PRO 1x 18 Planar Waveguide Basshorn 1200W / 600W, 8Ω,
Klik for større billede


Dynacord FX20-PRO 1x 18 Planar Waveguide Basshorn 1200W / 600W, 8Ω,



Prisen er inkl. 25% dansk moms

Leveringstid: 4 til 8 hverdage.

Butikkens adresse og åbningstid er:
Møllehaven 9
4040 Jyllinge - vis på kort
Mandag til fredag09.00 til 17.30
Lørdag og søndagLukket

Dynacord FX20-PRO Planar Wave guide Basshorn

The Dynacord FX20‑PRO is a Planar Waveguide Basshorn, equipped with the high‑power Electro‑Voice EVX 180B 18" transducer. Frequency response is 30Hz — 150Hz (‑10dB) so the crossover frequency to Mid‑Hi cabinets can be chosen strictly application‑oriented between 80Hz and 140Hz. The cabinet is equipped with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non‑controlled situations. The voice coil tracking protection exhibits "soft" switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value. The FX20‑PRO cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet has a heavy‑duty structured lacquer surface and a solid‑steel front grille matching the latest Dynacord enclosure design. The connector panel uses two 4‑pole Speakon connectors (IN/OUT) for a safe connection and easy daisy‑chaining to other cabinets. The pin assignment is 1+/1‑. Pins 2+ and 2‑ are also connected between the respective two Speakon connectors. When using Dynacord power amp racks or system amplifiers, the whole system can be wired with 4‑pole Speakon cables without any danger of accidental wiring mistakes. The cabinet is equipped with eight large rubber feet that allow easy stacking. Six handles and four heavy‑duty castors on the rear side guarantee easy and safe transport.

  • Passive subwoofer, planar waveguide bass horn
  • 600 W EVX 180B transducer
  • 30–150 Hz (-10 dB)
  • High-efficiency planar waveguide design
  • Voice coil tracking protection
Available ColorBlack
Weight Net54.3kg (119.71 lbs)
Audio Socket Contacts1+/1-
Audio Socket Models2x NEUTRIK speakON NL4MPR
Dimensions610 x 905 x 814mm
Enclosure finishHeavy-duty structured lacquer
Enclosure MaterialBirch plywood, 15mm
Frequency range (-10 dB), measured with Xa 400030–150Hz
GrillePowder coated steel with acoustic foam
Max. SPL/1m (calc)135dB
Nominal Impedance
Program power1200W
Rated power RMS600W
Recommended active crossover frequency140Hz, 18dB/oct. Butterworth
Shipping Weight60.5kg (133.38 lbs)
SPL 1 W/1 m101dB
TransducerEVX 180B
Voice coil tracking protectionYes

Dynacord FG600 Flying Grid, TÜV approvedDynacord FG600 Flying Grid, TÜV approved
Varenummer:: 10A05E57 Læs mere »
Leveringstid: 4 til 8 hverdage.8.429,00DKK

Indkøbskurv mere
0 varer: 0,00DKK
Levering: 0,00DKK
Tilbud mere
Dimavery Gong, 25cm with stand/mallet
Dimavery Gong, 25cm with stand/mallet
Tilbud mere
Kabel "god kvalitet" 2x RCA han til 2x XLR han, sort 1.5m
Kabel "god kvalitet" 2x RCA han til 2x XLR han, sort 1.5m
Dansk English

Copyright © 2019 DiscoWorld